gonzalobures
March 18, 2021
Doubled 1/8" original retract mounting rib with 5/16" plywood and balsa rib with 1/8" plywood. This was done on both ribs on the other side of this same retract as well as on the right wing. Hard wood spars were also installed tying uo the 4 ribs since the lead edge is not a strong point due to retract penetration.
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!